Allied-telesis AT-8203 Manuel d'utilisateur télécharger pdf (Page 10)

Verifying Your Uplink Package

Your uplink card package consists of:

❑

This installation guide

❑

One of the following cards:

— 155 Mbps ATM uplink OC-3 MMF card (model AT-8202), or

— FDDI uplink card (model AT-8203)

❑

One accelerator card

❑

Warranty card

If any of these components are damaged, contact your shipping carrier

representative. If any components are missing, please phone the Allied

Telesyn. Refer to Appendix D, “Where To Find Us,” on page 23.

Prerequisites for Card Installation

Before installing the uplink and accelerator cards, make sure you have the

following:

❑

An installed FORMULA 8200 switch and that it is functioning

properly

❑

Firmware version 1.4.3 or greater to support the uplink and

accelerator cards

If your switch does not have the latest firmware, download it from Allied

Telesyn’s FTP server. See Appendix D, “Where To Find Us” on page 23, for

information on how to access the server.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Pas de commentaire

Allied-telesis AT-8203 Manuel d'utilisateur Page 10