Allied-telesis AT-8202 Manuel d'utilisateur télécharger pdf (Page 49)

AT-8202 ATM Uplink User’s Guide

2-21

ATM/CONFIG/MODIFY/PTOP <PTOP Number> Example

This command allows you to modify the conﬁguration parameters of

the PTOP entry using <PTOP Number>. This command displays the

same screen as the

ATM/CONFIG/CREATE/PTOP <PTOP Number>

command.

ATM/CONFIG/MODIFY/TRUNK Example

This command allows you to modify the conﬁguration parameters of

the trunking entry using <Trunk Number>. This command displays

the same screen as the

ATM/CONFIG/CREATE/Trunk <Trunk

Number> command.

ATM/SHOW Commands

Syntax and (alias)

ATM/SHOW/ARP/CIP (vciparp)

ATM/SHOW/ARP/LEC (vlecarp)

ATM/SHOW/CIP (vcip)

ATM/SHOW/CONNECTION (vac)

ATM/SHOW/LEC (vlec)

ATM/SHOW/PORT (vap)

ATM/SHOW/PTOP (vptop)

ATM/SHOW/TRUNK (vtrunk)

Description

The

ATM/SHOW commands allow you to display various ATM states

and settings. See the command examples for a brief description of

each use of the

ATM/SHOW command.

ATM/SHOW/ARP/CIP <CIP Index> Example

This command displays the entries in the ARP table of the CIP entity.

The ARP entity contains the resolution of the IP addresses to ATM

addresses at which the destination is accessible. A sample display of

ATM/SHOW/ARP/CIP <CIP Index> is shown below, and parameters

are described in Table 2-7.

/ATM/SHOW/ARP >CIP 5

CIP 5 ARP Table Display

IndexIP Address ATM Address VCI Expiry Time

=================================================================================

0 137.168.132.20 0x47000580ffe1000000f215149500204815149500 57 -1 Seconds

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

Pas de commentaire

Allied-telesis AT-8202 Manuel d'utilisateur Page 49