Allied-telesis AT-8202 Manuel d'utilisateur télécharger pdf (Page 21)

AT-8202 ATM Uplink User’s Guide

1-13

Note

You must enter a VCI value when configuring a PVC connection type.

Additionally, make sure the PVC number is identical on all

FORMULA 8200 switches.

3. Enter

6 for VCI value configuration at the prompt.

4. Enter

501 as the VCI value when prompted.

/ATM/CONFIG/CREATE >PTOP 1

PTOP Configuration

1. PTOP Index: 1

2. PTOP Description (Optional): PTOP Instance 1

3. Admin Status(ENABLE(a),DISABLE(b): ENABLED

4. Encapsulation Type:(RFC1483(a),Proprietary RFC1483

5. Connection Type (PVC(a), (SVC(b): PVC

6. VCI value (Reqd if PVC):

7. Destination ATM Address (reqd if SVC):

Enter Selection, 0 to save the Modification or ‘q’ to Quit: 0

/Enter VCI value: 501

PTOP Configuration

1. PTOP Index: 1

2. PTOP Description (Optional): PTOP Instance 1

3. Admin Status(ENABLE(a),DISABLE(b): ENABLED

4. Encapsulation Type:(RFC1483(a),Proprietary RFC1483

5. Connection Type (PVC(a), (SVC(b): PVC

6. VCI value (Reqd if PVC): 501

7. Destination ATM Address (reqd if SVC):

Enter Selection, 0 to save the Modification or ‘q’ to Quit: 0

New VCI value

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 79 80

Pas de commentaire

Allied-telesis AT-8202 Manuel d'utilisateur Page 21