Allied-telesis AT-8000S Manuel d'utilisateur télécharger pdf (Page 35)

Initial Configuration

Configuration

Page 35

Note

100.1.1.254 is the IP address of the default gateway that is used to reach the management network

101.101.0.0.

To check the configuration, enter the command “show ip interface” as illustrated in the following example.

User Name

A user name is used to manage the device remotely, for example through SSH, Telnet, or the Web interface. To

gain complete administrative (super-user) control over the device, the highest privilege (15) must be specified.

Note

Only an administrator (super-user) with the highest privilege level (15) is allowed to manage the device

through the Web browser interface.

For more information about the privilege level, see the CLI Reference Guide.

The configured user name is entered as a login name for remote management sessions. To configure user name

and privilege level, enter the command at the system prompt as shown in the configuration example:

Console#

show ip interface

Gateway IP Address Activity Status Type

----------------------------- ---------------- ---------

100.1.1.254 active static

IP Address I/F Type

----------------------------- ---------------- ---------

100.1.1.1/16 vlan 1 static

Console>

enable

Console#

configure

Console(config)#

username admin password

lee

privilege

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

Pas de commentaire

Allied-telesis AT-8000S Manuel d'utilisateur Page 35