Allied-telesis AT-3714FXL Manuel d'utilisateur télécharger pdf (Page 32)

Troubleshooting

3-2

Network Cabling Problems

If you have 100Base-TX (Fast Ethernet), some network problems may

be related to exceeding cabling distances. Refer to the standard IEEE

802.3u, Clause 29.3.1.2 on

Worst Case Path Delay Value

. This

document specifies that the collision domain diameter must be

within the following limits:

Under 330 ft (100 m) for TX cabling

Under 1331.56 ft (412 m) for half-duplex FX cabling

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 55 56

Pas de commentaire

Allied-telesis AT-3714FXL Manuel d'utilisateur Page 32