Allied-telesis AT-3714FXL Manuel d'utilisateur télécharger pdf (Page 30)

Installing the Switch

2-12

Figure 2-5

Connecting the 50-Pin Plug

6. Secure the MDA to the front of the switch with the 3 flathead Phillips

screws that came with the MDA package.

7. Apply power to the unit as follows:

Caution

Power cord is used as a disconnection device. To de-energise

equipment disconnect the power cord.

Re-attach the power cord to the unit and plug it in the wall outlet.

Verify that the Power LED lights green. See Table 2-1 on page 2-6.

8. Connect the data cable. Verify that the LEDs light.

Media Dependant

Adapter LEDs

The MDA LEDs are located on the front panel of the switch under

Port Activity.

For troubleshooting techniques, see Chapter 3,

Troubleshooting

PORT A

100BASE-TX

10BAS

AT-A10

100BASE-TX

Standoff

50-pin plug

Slot

Table 2-4

Media Dependent Adapter LEDs

LED Color State Description

Link Green

There is a good physical link with

a device.

Activity Green

Flashing

The Ethernet port is receiving/

transmitting packets.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 55 56

Pas de commentaire

Allied-telesis AT-3714FXL Manuel d'utilisateur Page 30