Allied-telesis AT-2746FX Manuel d'utilisateur télécharger pdf (Page 66)

Chapter 3: Microsoft Windows 2000, 2003, and XP

11. If the card has not been installed, the prompt in Figure 21 is displayed.

Remove the CD from the CD driver and click Yes. The Windows

operating system and the system are automatically shut down. You

can now install the adapter card. For instructions, refer to Chapter 2,

“Installing a Network Adapter Card” on page 45.

Figure 21. Shut Down Prompt

Running

AT-Setup from a

Driver

Installation

Diskette

To install the network adapter driver using the AT-Setup utility from a

driver installation diskette, perform the following procedure:

1. Insert the driver installation disk into the floppy drive.

Note

For instructions on how to create a driver installation disk, refer to

“Creating a Driver Installation Disk” on page 68.

2. From the Start menu on the Window’s toolbar, select Run, as shown in

Figure 22.

Figure 22. Run Selection in the Start Menu

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 237 238

Pas de commentaire

Allied-telesis AT-2746FX Manuel d'utilisateur Page 66