Allied Telesis AR450S Spécifications télécharger pdf (Page 11)

Installation and Safety Guide 11

613-000313 Rev B

2. Access the CLI on the router.

Follow the instructions in the previous section “Using the CLI to Configure

AR410, AR410S, AR450S” on page 8.

3. Enable IP.

In the CLI, enter the command:

enable ip

4. Assign an IP address to VLAN1.

Assign the VLAN1 interface an IP address in the subnet that the PC uses, using

the command:

add ip interface=vlan1 ip=ipaddress mask=mask

5. Browse to the GUI.

If you access the Internet through a proxy server, set your browser to bypass

the proxy for the IP address you assigned to the VLAN1 interface.

Point your web browser at the IP address of the VLAN interface.

6. Log in and set the password.

At the log in prompt, enter the log in name and password. Passwords are case

sensitive.

User Name: manager

Password: friend

The system status page appears and you can now use the GUI to configure the

router.

Important To ensure configuration settings are saved correctly, use the GUI

menus and buttons to navigate, not your browser’s buttons.

Caution As a security precaution, change the password as soon as

possible.

To change the password, select Management > Users from the sidebar menu.

Select the Manager account and click Modify.

7. Configure the router.

Use the GUI to continue configuring your router. To access context-sensitive

help in the GUI, click on the Help button [Help]. The Help button is located at

the top of the sidebar menu or on any popup page.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Pas de commentaire

Allied Telesis AR450S Spécifications Page 11