Allied-telesis AT-FS717FC/SC Manuel d'utilisateur télécharger pdf (Page 37)

AT-FS717FC/SC Fast Ethernet Switch Installation Guide

Cabling a Dual SC Connector

To connect a fiber optic cable to a dual SC connector, perform the

following procedure:

Warning

Class 1 laser product.  1

Warning

Do not stare into the laser beam.  2

1. Remove the dust cover from the fiber optic port, as shown in Figure 14.

Figure 14. Removing the Dust Cover from a Dual SC Fiber Optic Port

2. Connect the appropriate optical cable to the port, as shown in

Figure 15.

Figure 15. Connecting to the Dual SC Fiber Optic Port

3. Connect the other end of the optical cable to the link partner.

4. Power ON the end-nodes.

5. Check that all the LINK/ACT LEDs are green. If any of the LEDs is

OFF, refer to “Installation” on page 25 for instructions.

1132

1133

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 68 69

Pas de commentaire

Allied-telesis AT-FS717FC/SC Manuel d'utilisateur Page 37