Allied-telesis AT-FS717FC/SC Manuel d'utilisateur télécharger pdf (Page 33)

AT-FS717FC/SC Fast Ethernet Switch Installation Guide

Wall-Mounting the Switch

The switch can be mounted horizontally on a wall using the two keyhole

slots in the bottom of the switch.

To mount an AT-FS717FC/SC switch onto a wall, perform the following

procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. If attached, remove the rubber feet, data cables, and power cord from

the switch.

3. Select a wall location for the switch.

4. Mark two hole locations on the wall.

5. At the marked locations for the holes, pre-drill for the drywall anchors

and drive the screws through the holes.

6. Align the switch horizontally, as illustrated in Figure 10.

Figure 10. Aligning an AT-FS717FC/SC for Wallmount Installation

1138

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 68 69

Pas de commentaire

Allied-telesis AT-FS717FC/SC Manuel d'utilisateur Page 33