Allied-telesis AT-FS705L Manuel d'utilisateur télécharger pdf (Page 26)

Chapter 2: Installation

Unpacking the Switch

To unpack an AT-FS705L switch, perform the following procedure:

1. Remove all components from the shipping package.

Note

Store the packaging material in a safe location. You must use the

original shipping material if you need to return the unit to Allied

Telesis.

2. Place the switch on a level, secure surface.

3. Verify that the following hardware components are included in your

switch package. If any item is missing or damaged, contact your Allied

Telesis sales representative for assistance.

 One AT-FS705L Fast Ethernet switch

 Rubber Feet for desktop installation

 Wall mount kits

 AC power cord

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Pas de commentaire

Allied-telesis AT-FS705L Manuel d'utilisateur Page 26