Allied Telesis AR450S Guide de l'utilisateur télécharger pdf (Page 96)

96 AR400 Series Router User Guide

Software Release 2.5.2

C613-02034-00 REV A

supervisor. For more details, contact your local Novell network

administrator or refer to the Novell documentation.

2. Ensure that the routers you want to configure are connected as described in

the Quick Install Guide.

3. Connect a terminal to the console port (port 0) on each router as described

in the in the Quick Install Guide. Alternatively, you can connect a PC to the

console port and use a terminal emulation program like Windows™

Terminal.

4. Login to the MANAGER account on each router. (see “Logging In” on

page 15)

Configuring IPX

This example (Figure 10 on page 96) illustrates the steps required to configure a

pair of AR410 routers to create a Novell® IPX internetwork, using the router’s

command line interface. In this scenario, PCs at a remote office need access to a

Novell file server at the Head Office site. The two sites are connected by a PPP

link over a wide area link—either a dedicated leased line or an ISDN call.

Figure 10: Example configuration for an IPX network.

Table 11: Frame type and equivalent router encapsulation.

Novell Frame Type Router Encapsulation

Ethernet_802.3 802.3

Ethernet_802.2 802.2

Ethernet_II EthII

Ethernet_SNAP SNAP

Head Office Router

Network = 401

Remote Office Router

Network = 12

Netware

File Server

Remote PC

PPP Data Link

Network = 129

UGIPX1_R

Table 12: Example configuration parameters for an IPX network .

Configuration Parameter Head Office Router Remote Office Router

Ethernet interface eth0 eth0

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 118 119

Pas de commentaire

Allied Telesis AR450S Guide de l'utilisateur Page 96