Allied Telesis AT-2931SX Guide d'installation télécharger pdf (Page 93)

AT-29xx Series Gigabit Ethernet Network Adapters Installation Guide

Removing Drivers from Autoexec.ncf

To remove the drivers from the Autoexec.ncf, locate the Load and Bind

command lines associated with the Broadcom driver and remark them out

by inserting the # symbol at the beginning of each command line, or by

deleting the statement.

Example:

# LOAD B57 SLOT=2 FRAME=Ethernet_802.2

NAME=B57_1_E82

# BIND IPX B57_1_E82 NET=FAFD3D25

# LOAD B57 SLOT=2 FRAME=Ethernet_802.3

NAME=B57_1_E83

# BIND IPX B57_1_E83 NET=5A2D8D6D

# LOAD B57 SLOT=2 FRAME=Ethernet_SNAP NAME=B57_1_ESP

# BIND IPX B57_1_ESP NET=477A35BD

# LOAD B57 SLOT=2 FRAME=Ethernet_II NAME=B57_1_EII

# BIND IPX B57_1_EII NET=C3C8F2E4

# BIND IP B57_1_EII ADDR=172.16.1.1 MASK=ff.ff.ff.0

Note

If you modify the Autoexec.ncf, you must reboot the system before

the changes take effect.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 139 140

Pas de commentaire

Allied Telesis AT-2931SX Guide d'installation Page 93