Allied Telesis AT-iMG634 - R2 Guide de l'utilisateur télécharger pdf (Page 841)

100

101

PPPoE command reference PPPoE

8-71

iMG/RG Software Reference Manual (ADSL Port)

Example --> pppoe add transport pppoe_t dialout eth 2 vlan_2

See also PPPOE LIST TRANSPORTS

IP LIST INTERFACES

VLAN SHOW

8.7.4.1.2 PPPOE ADD TRANSPORT DIALOUT PVC

Syntax PPPOE ADD TRANSPORT

<name>

DIALOUT PVC

<vci> [

ACCESSCONCENTRATOR

<concentrator>] [

SERVICENAME

<service-

name>]

Description This command creates a PPPoE transport that performs dialout over a PVC (Permanent

Virtual Circuit). It allows you to specify the following PVC information:

• The PPP interface to the channel that the PVC will use

• The ATM port that will transport data

• VPI (Virtual Path Identifier)

• VCI (Virtual Circuit Identifier)

• Access concentrator (optional)

• Service name (optional)

The port/VPI/VCI combination must be unique for each transport.

OptionsThe following table gives the range of values for each option that can be specified

with this command and a default value (if applicable).

service name A PPPoE tag that identifies a specific service that is acceptable to

the PPPoE client. If set, the PPPoE transport will connect to the

first access concentrator it finds that uses this service. If an access

concentrator is also set, the PPPoE transport will connect to the

specified service on the named concentrator. It is your ISP that

determines the service name.

N/A

Option Description Default Value

name An arbitrary name that identifies the transport. It can

be made up of one or more letters or a combination of

letters and digits, but it cannot start with a digit.

N/A

1 2 ... 836 837 838 839 840 841 842 843 844 845 846 ... 997 998

Commentaires sur ces manuels

Pas de commentaire

Allied Telesis AT-iMG634 - R2 Guide de l'utilisateur Page 841

Commentaires sur ces manuels

Produits connexes et manuels pour Passerelles/contrôleurs Allied Telesis AT-iMG634 - R2