Allied Telesis AT-FH708E Guide d'installation télécharger pdf (Page 30)

Note

For wall-mount installation, you must

supply the two screws and plastic

anchors or other material necessary to

physically mount the hub to the wall.

3. Install two plastic anchors and two pan-head

screws into the wall, separated by 5

centimeters (approximately 2 inches).

4. Position the device onto the wall screws.

5. Plug the power adapter into a power source,

and plug the DC power cord into the DC

connector on the front panel of the hub.

Warning

The power cord is used as a

disconnection device. To de-energize

equipment, disconnect the power cord.

6. Make sure the Power LED on the front panel

lights green.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 50 51

Pas de commentaire

Allied Telesis AT-FH708E Guide d'installation Page 30