Allied-telesis x310 Series Manuel d'utilisateur télécharger pdf (Page 87)

x310 Series Installation Guide for Stand-alone Switches

that also support Auto-Negotiation for duplex modes.

 The default duplex mode setting of Auto-Negotiation is not

appropriate for ports connected to network devices that do not

support Auto-Negotiation and have a fixed duplex mode. You

should disable Auto-Negotiation on those ports and set their duplex

modes manually to avoid the possibility of duplex mode

mismatches. A switch port using Auto-Negotiation defaults to half-

duplex if it detects that the end node is not using Auto-Negotiation.

This can result in a mismatch if the end node is operating at a fixed

duplex mode of full-duplex.

 Do not attach cables to ports of static or LACP port trunks until

after you have configured the trunks on the switch. Otherwise, the

ports will form network loops that can adversely affect network

performance.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 115 116

Pas de commentaire

Allied-telesis x310 Series Manuel d'utilisateur Page 87