Allied-telesis SwitchBlade Chassis and Fan Tray Manuel d'utilisateur télécharger pdf (Page 9)

Quick Install Guide 9

C613-04029-01 REV C

Slide the fan tray out of the chassis, making sure to keep the tray in a

straight alignment so that it doesn’t jam.

When removing fan trays, avoid contact with spinning fan blades. Contact may

cause personal injury or fan damage.

Figure4: Fan tray ejectors.

6. Insert the new fan tray

With the fan tray’s ejector levers in the unlocked position (see Figure 4 on

page -9), slide the fan tray into the chassis, making sure to keep the tray in

a straight alignment so that it doesn’t jam (see Figure 5 on page -9).

Fan trays are mounted horizontally in the SwitchBlade 8 chassis (AT-SB4108) and

vertically in the SwitchBlade 4 chassis (AT-SB4104).

Figure5: Fan tray insertion.

1 2 3 4 5 6 7 8 9 10 11

Pas de commentaire

Allied-telesis SwitchBlade Chassis and Fan Tray Manuel d'utilisateur Page 9