Allied-telesis AT-S60 Manuel d'utilisateur télécharger pdf (Page 690)

Chapter 39: STP, RSTP, and MSTP

Section VI: Web Browser Management 690

This parameter defines whether the port is functioning as an edge

port. For an explanation of this parameter, refer to Point-to-Point

Ports and Edge Ports on page 234.

Point-to-Point

This parameter defines whether the port is functioning as a point-

to-point port. For an explanation of this parameter, refer to Point-

to-Point Ports and Edge Ports on page 234.

Port External Path Cost

The port cost of the port if the port is connected to a bridge which

is a member of another MSTP region or is running STP or RSTP. The

range is 0 to 200,000,000. The default setting is 200,000.

5. After adjusting the parameters, click Apply.

To save your changes, return to the General Tab and click Save

Changes. The changes you made are saved on the switch.

6. Repeat this procedure to configure MSTP parameters for other switch

Pas de commentaire

Allied-telesis AT-S60 Manuel d'utilisateur Page 690