Allied-telesis AT-S25 Manuel d'utilisateur télécharger pdf (Page 65)

AT-S25 Version 1.4 User’s Guide

The Port Status window contains the following information:

Port

This column displays the number and name of each port. You can

assign names to the ports to make them easier to identify. For

instructions on assigning port names, refer to Configuring Port

Parameters on page 66.

The standard twenty four ports on an AT-8324 switch are

numbered 1 to 24, and the standard sixteen ports on an AT-8316F

switch are numbered 1 to 16.

Link

This column indicates whether there is an active connection

between a port and the device connected to the port. Offline

indicates that there is no link, while Online indicates that there is

a link. If a port is online, this column will also specify the operating

speed of the port.

Status

This column indicates whether a port is enabled or disabled. For

instructions on how to manually disable or enable a port, refer to

Configuring Port Parameters on page 66.

Mode

This column indicates the duplex mode of the ports. Possible

values are auto-negotiate, full-duplex, or half-duplex. For

instructions on how to manually set the duplex mode of a port,

refer to Configuring Port Parameters on page 66.

The web-based Omega interface features a Refresh button at the

bottom of the window. You can use the button to query the

switch for the latest port status and displays the status on the

screen.

3. Return to the Main Menu.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 165 166

Pas de commentaire

Allied-telesis AT-S25 Manuel d'utilisateur Page 65