Allied-telesis AT-S25 Manuel d'utilisateur Page 43

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 277
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 42
AT-S25 Management Software Users Guide
43
Configuring an IP Address and Switch Name
The procedure in this section explains how to manually assign an IP
address, subnet mask, and gateway address to the switch from a local or
Telnet management interface. (If you wish the switch to obtain its IP
configuration from a DHCP or BOOTP server on your network, go to the
procedure Activating the BOOTP and DHCP Services on page 46.)
This procedure also explains how to assign a name to the switch, along
with other optional information, such as the name of the administrator
responsible for maintaining the unit and the location of the switch.
To manually set a switchs IP address, perform the following procedure:
1. From the Main Menu, type 4 to select Administration Menu.
The Administration Menu in Figure 10 is displayed.
Figure 10 Administration Menu
2. Enter or modify the parameters in the window as desired.
Changes to the parameters take effect immediately on the switch.
Vue de la page 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 276 277

Commentaires sur ces manuels

Pas de commentaire