Allied-telesis AT-MC1008/SP Manuel d'utilisateur télécharger pdf (Page 31)

AT-MC1008 Series Installation Guide

Planning the Installation

Be sure to observe the following guidelines when planning the installation

of your media converter.

 The end-node connected to the fiber port must be compatible with the

SFP or GBIC transceiver.

 The 1000Base-T twisted pair port is set to a fixed 1000 Mbps speed

and can operate in full-duplex only with Auto-Negotiation. For cabling

specifications, refer to Table 2 on page 18.

 The end-node connected to the media converter can be any other

ethernet network device, such as an adapter card, repeater, router,

hub, switch, or another media converter.

 The twisted pair cabling must be kept away from sources of electrical

noise, such as radios, transmitters, power lines, broadband

amplifiers, electrical motor, and fluorescent fixtures.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 91 92

Pas de commentaire

Allied-telesis AT-MC1008/SP Manuel d'utilisateur Page 31