Allied-telesis AT-2972T/2 Manuel d'utilisateur Page 30
- Page / 76
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 2: Broadcom Advanced Control Suite 2 (BACS 2) Applications
30
Duplex.
10 Mb Half and 100 Mb Half settings force the network adapter to
connect to the network in Half-Duplex mode. The network adapter
may not function if the network is not configured to operate at the
same mode.
– 100 Mb Full. Sets the speed at 100 Mbit/s and the mode to Full-
Duplex.
– 100 Mb Half. Sets the speed at 100 Mbit/s and the mode to Half-
Duplex.
10 Mb Full and 100 Mb Full settings force the network adapter to
connect to the network in Full-Duplex mode. The network adapter
may not function if the network is not configured to operate at the
same mode.
– Auto (default). Sets the speed and mode for optimum network
connection (recommended). This setting allows the network
adapter to dynamically detect the line speed of the network.
Whenever the network capability changes, the network adapter
automatically adjusts to the new line speed and duplex mode. A
speed of 1 Gbit/s is enabled by selecting Auto, when that speed is
supported.
Wake Up Capabilities. The Wake Up Capabilities property enables
the network adapter to wake up from a low-power mode when it
receives a network wake-up frame. Two types of wake-up frames are
possible: Magic Packet and Wake Up Frame.
Note
This parameter is available only for copper devices and is not
displayed for the AT-29xxSX Series adapters.
– Both (default). Selects both Magic Packet and Wake Up Frame as
wake-up frames.
– Magic Packet. Selects Magic Packet as the wake-up frame.
– None. Selects no wake-up frame.
– Wake Up Frame. Selects Wake Up Frame as the wake-up frame
and allows the network adapter to wake the system when an event
such as a ping or an Address Resolution Protocol (ARP) request is
received.
WOL Speed. The WOL Speed property sets the speed at which the
network adapter connects to the network while the network adapter is
- User’s Guide 1
- Contents 3
- Contacting Allied Telesis 9
- Chapter 1 11
- Failover and 14
- Load Balance 14
- Virtual LAN 14
- (BACS 2) Applications 15
- Overview 16
- Applications 17
- Information 17
- Provided by the 17
- Installing Using 19
- Using Silent 19
- Installation 19
- Managing the BACS Application 21
- Ethernet@Wirespeed 27
- Network Test 31
- Cable Analysis 33
- General Statistics 35
- IEEE 802.3 Statistics 36
- Custom Statistics 36
- BASP Statistics 37
- Configuring Teaming 39
- Creating a Team 40
- Using the Wizard 40
- Using the Expert 50
- Modifying a 54
- Viewing the 59
- Team Properties 59
- Chapter 3 61
- Installing the BASP 62
- Uninstalling the BASP 63
- Key Protocols and Interfaces 65
- Adapter Teaming 66
- Smart Load 67
- Balance Auto 67
- Failback Disable 67
- Failover Teaming 68
- VLANs Overview 69
- 32-bit or 64-bit 72
- PCI Bus Master 72
- ASIC with 72
- Embedded RISC 72
- Processor 72
- Troubleshooting 73
- Chapter 5: Troubleshooting 74
- “Windows 2000,” next 75
- Broadcom 76
- Advanced Server 76
- Program (BASP) 76
Produits connexes et manuels pour Matériel informatique Allied-telesis AT-2972T/2
(32 pages)ABC Office 20612 C Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Aktenvernichter ABC Office 20612 C.
Wir stellen 1 PDF-Handbücher ABC Office 20612 C zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commentaires sur ces manuels