Allied-telesis AT-2912T Manuel d'utilisateur télécharger pdf (Page 19)

AT-2712FX/SC and AT-2912T Secure Ethernet Network Adapter Installation and User’s Guide

Physical Descriptions

This section provides descriptions of the AT-2712FX/SC and AT-2912T

faceplates and LEDs.

AT-2712FX/SC

Adapter Physical

Description

The faceplate on the AT-2712FX/SC adapter provides two fiber optic

connectors for attaching the adapter to a compatible link partner. See

Figure 3 for an illustration of the adapter’s faceplate.

The AT-2712FX/SC adapter has one fiber port and one LED, as shown in

Figure 3 and described in Table 1.

Figure 3. AT-2712FX/SC Faceplate

AT-2912T

Adapter Physical

Description

The faceplate on the AT-2912T adapter provides one twisted-pair

connector for attaching the adapter to a compatible link partner. See

Figure 4 for an illustration of the adapter’s faceplate.

Figure 4. AT-2912T Faceplate

Table 1. Fiber Optic Port 100 LED Status

State Description

Green The port is operating at 100 Mbps and has a valid

link.

Flashing The port is receiving or transmitting network packets

at 100 Mbps.

1484

100

1595

L/A

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Pas de commentaire

Allied-telesis AT-2912T Manuel d'utilisateur Page 19