Allied-telesis AlliedView-EMS 4.0.2 QoS-Manager Manuel d'utilisateur Page 105
- Page / 146
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
AlliedView™-EMS 4.0.2 QoS Manager User’s Guide Page 105 of 146
Property Name Description Valid Values
of the bit at the same position in the
byte value of the MAC address is
used to determine a match. If a bit
in the Source MAC Address
parameter is 0, the corresponding
bit in the Source MAC Address
parameters is ignored.
• XX-XX-XX-XX-XX-XX
This can also be set to "any".
Destination MAC
Address Mask
Specifies the masks to be used on
the Destination MAC Address.
When a bit is set to 1 in the mask,
the value of the bit at the same
position in the byte value of the
MAC address is used to determine a
match. If a bit in the Destination
MAC Address parameter is 0, the
corresponding bit in the Destination
MAC Address parameters is
ignored.
This can be set by entering a MAC
address string using the following
format:
• XX-XX-XX-XX-XX-XX
This can also be set to "any".
MAC Type Specifies whether the packet is a
Layer 2 unicast (L2UCAST), Layer 2
multicast (L2MCAST) or Layer 2
broadcast Ethernet (L2BCAST).
• L2UCAST
• L2MCAST
• L2BCAST
• any
Tag Protocol ID Specifies the Tag Protocol Identifier
field in the packet.
This can be set by entering a 4 digit
hex number from 0000-FFFF.
This can also be set to "any".
VLAN Priority Specifies the 802.1P priority in the
VLAN tag.
Range: any, 0-7
VLAN Specifies:
• For IPv4 packets and
switched Layer 2 IPv6
packets, the source VLAN
that the packet was
associated with at the time
of classification.
• For accelerated IPv6 packets
at the Layer 2 processor of
the accelerator card, the
destination VLAN.
This can be set by selecting from a
list of available VLANs or "any".
Inner Tag
Protocol ID
Specifies the TPID in the second
802.1Q tag in the packet.
This can be set by entering a 4-byte
hex number from 0000-FFFF.
This can also be set to "any".
Inner VLAN Specifies the second 802.1P field in Range: any, 0-7
- AlliedView™-EMS 4.0.2 1
- QoS MANAGER USER’S GUIDE 1
- TABLE OF CONTENTS 2
- 1 Overview 5
- 2 Starting QoS Manager 6
- 3 Main Window 7
- 3.1 Initial Window 8
- 10
- 4 Basic Operations 11
- 4.1 Add 12
- 4.2 Modify 14
- 4.3 Delete 16
- 4.4 Inline Table Editing 17
- 4.5 Apply 18
- 5 Menus 20
- 5.1 File 21
- 5.1.2 Close 24
- 5.1.3 Exit 25
- 5.2 Tools 26
- 5.2.2 Refresh 28
- 5.2.3 Reboot 29
- 5.3 Help 30
- 6 Device Support 31
- 6.1 AT-8000S Series 32
- 6.1.3 Scheduling 33
- 6.1.4 CoS Priority 33
- 6.1.5 DSCP Priority 33
- 6.1.6 Bandwidth 33
- • enabled 34
- • disabled 34
- 6.2 AT-8600 Series 35
- • XX-XX-XX-XX-XX-XX 38
- • IPv6 38
- 6.2.2 Flow Groups 39
- 6.2.3 Traffic Classes 40
- 6.2.4.2 Add/Modify Policy 41
- 6.2.5 Ports 42
- 6.2.6 Scheduling 42
- 6.2.7 Quick Setup 42
- 6.2.8 Notes 43
- 6.3 AT-8800 Series 44
- 6.3.2 Flow Groups 48
- 6.3.3 Traffic Classes 49
- 6.3.4.2 Add/Modify Policy 50
- 6.3.5 Ports 51
- 6.3.6 Scheduling 51
- 6.3.7 Quick Setup 51
- 6.3.8 Notes 52
- 6.4 AT-9000/24 53
- 6.5 AT-9400 Series 54
- 6.5.2 Flow Groups 56
- 6.5.3 Traffic Classeses 57
- 6.5.4 Policies 58
- 6.5.4.2 Add/Modify Policy 59
- 6.5.4.1 Modify Ports 60
- 6.5.8 Notes 61
- 6.6 AT-9900 Series 62
- 6.6.2 Flow Groups 71
- 6.6.3 Traffic Classes 72
- 6.6.4.2 Add/Modify Policy 75
- 6.6.5 Ports 78
- 6.6.6 Scheduling 78
- 6.6.7 Quick Setup 80
- 6.6.8 Notes 80
- 6.7.1 Classifiers 83
- 6.7.2 Flow Groups 92
- 6.7.3 Traffic Classes 93
- 6.7.4.2 Add/Modify Policy 96
- 6.7.5 Ports 99
- 6.7.6 Scheduling 99
- • wrr1 to schedule weighted 100
- • wrr2 to schedule weighted 100
- • 10 Gigabit max length is 100
- 6.7.7 Quick Setup 101
- 6.7.8 Notes 101
- 6.8 AT-x900-48 Series 104
- • MRTERMINATION 112
- • byteoffset is a decimal 112
- • bytevalue is a 2-digit 112
- 6.8.2 Flow Groups 113
- 6.8.3 Traffic Classes 114
- 6.8.4.2 Add/Modify Policy 117
- 6.8.5 Ports 120
- 6.8.6 Scheduling 120
- 6.8.7 Quick Setup 122
- 6.8.8 Notes 122
- 6.9 Rapier 125
- 6.9.2 Flow Groups 132
- 6.9.3 Traffic Classeses 132
- 6.9.4.2 Add/Modify Policy 134
- 6.9.7 Quick Setup 135
- 6.9.8 Notes 135
- 6.10 SwitchBlade Series 137
- 6.10.2 Flow Groups 140
- 6.10.3 Traffic Classes 141
- 6.10.4.2 Add/Modify Policy 143
- 6.10.7 Quick Setup 144
- 6.10.8 Notes 145
Produits connexes et manuels pour Matériel informatique Allied-telesis AlliedView-EMS 4.0.2 QoS-Manager
(124 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels