Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manuel d'utilisateur télécharger pdf (Page 144)

AlliedView™-EMS 3.10 Device Management Guide Page 144 of 367

Route Table

Displays the IP routing table on the router.

IP Statistics

Displays statistics about IP routing, including the number of IP datagrams received.

ICMP Statistics

Displays ICMP statistics.

Bridge Menu

From the Bridge menu, you can view and edit bridge information such as the forwarding

database and spanning tree status. The Bridge submenus are greyed out if bridges not

configured.

Discard/Aging Time Info

Displays information about the number of address entries that were learned but

discarded because either there was a lack of memory or the entry's aging timer

expired.

Spanning Tree Info

Displays spanning tree parameters such as priority and cost.

ATM Menu

From the ATM menu you can view and edit ATM information. The ATM instance submenus

are greyed out if no ATM instances are configured. The ATM channel submenus are greyed

out if no ATM channels are configured.

Instance Configuration

Displays ATM Instance configuration information.

Note - The current firmware version does not allow the following parameters to be

configured:

• Max VPC

• Max VCC

• Max Active VPI Bits

• Max Active VCI Bits

• ILMI VPI

• ILMI VCI

• Neighbor IP Address

• Neighbor Name

Attempting to configure these parameters will result in the error message: "The

error occurred with 'Set' operation. Error: noSuchName."

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 366 367

Pas de commentaire

Allied-telesis AlliedView-EMS 3.10 DEVICE MANAGEMENT Manuel d'utilisateur Page 144