Allied-telesis AT-MCR12 Manuel d'utilisateur télécharger pdf (Page 39)

AT-MCR12 Media Conversion Rack-Mount Chassis Installation Guide

Powering on an AC-Powered Chassis

To power on the chassis, perform the following procedure:

1. Connect the power cord to the power supply.

2. Plug the other end of the power cord into a wall outlet.

3. Verify that the power on LED is illuminated and the power supply

cooling fan is operating normally.

Warning: Power cord is used as a disconnection device. To de-

energize equipment, disconnect the power cord.  E3

Pluggable Equipment. The socket outlet shall be installed near

the equipment and shall be easily accessible.  E5

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 49 50

Pas de commentaire

Allied-telesis AT-MCR12 Manuel d'utilisateur Page 39