Allied-telesis AT-MC13 Manuel d'utilisateur télécharger pdf (Page 46)

Appendix B: Cleaning Fiber Optic Connectors

Note

Do not touch the end face of the ferrule in the connector.

Warning

Do not stare into the laser beam. 2

Warning

Do not look directly at the fiber optic cable ends or inspect the cable ends

with an optical lens. 31

Using a Swab

Specially treated swabs, or stick cleaners, are available for cleaning

inside connector adapters or hard-to-reach ferrule tips. These swabs,

often referred to as “lint free” or “alcohol free” swabs are available from

many vendors, as shown in Figure 26 on page 46. Stick cleaners are

available in both 2.5 mm and 1.25 mm sizes for use on SC and MU

connectors respectively.

Figure 26. Lint-Free and Alcohol-Free Swabs

Note

Never use a household cotton swab and alcohol to clean a fiber

optic connector. This may leave a residue on the ferrule tip.

Note

Do not used compressed air or aerosol air to clean a fiber optic

connector.

106

1 2 ... 41 42 43 44 45 46 47 48

Pas de commentaire

Allied-telesis AT-MC13 Manuel d'utilisateur Page 46