Allied-telesis AT-GS905 Manuel d'utilisateur télécharger pdf (Page 27)

AT-GS905 Gigabit Ethernet Switch Installation Guide

Wall- Mounting the Switch

The AT-GS905 switch can be used on a desktop or mounted onto a wall.

To use the switch on a desktop, refer to Using the Switch on a Desktop

on page 26.

To mount an AT-GS905 switch onto a wall, perform the following

procedure:

1. Remove all equipment from the package and store the packaging

material in a safe place.

2. Select a wall location for the switch.

3. Mark two hole locations (3-3/8 inches apart) on the wall.

4. At the two marked locations for the holes, pre-drill for the drywall

anchors (provided) and drive the screws (provided) through the

holes.

5. Align the switch horizontally, as illustrated in Figure 6.

Figure 6 Aligning an AT-GS905 Switch For Wallmount Installation

AT- G

905

10/100

000 Ba

se-

abi

t E

therne

t Sw

100M

1000M

LNK/ACT

FDX

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Pas de commentaire

Allied-telesis AT-GS905 Manuel d'utilisateur Page 27