Allied-telesis AT-FS709FC Manuel d'utilisateur télécharger pdf (Page 28)

Installing the Switch

You can install the switch on a table or in a 19-inch rack. To install the switch,

perform the following procedure:

1. Remove all components from the shipping package and store the

packaging material in a safe location.

Note

You should use the original packaging material if, for any reason, you

need to return the unit to Allied Telesyn International.

2. Locate a level, secure surface for the switch.

3. To mount the switch in a rack, do the following:

a. Affix one of the rack-mounting brackets to the side of the switch, as

shown in Figure 6.

Figure 6 Installing a Rack-mounting Bracket

b. Install the second bracket on the other side of the switch.

c. Install the switch in a 19-inch rack. (Screws for mounting the switch

in the rack are not provided.)

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 45 46

Pas de commentaire

Allied-telesis AT-FS709FC Manuel d'utilisateur Page 28