Allied-telesis AT-FS705PD Manuel d'utilisateur télécharger pdf (Page 11)

AT-FS705PD Fast Ethernet Switch Installation Guide

Status LEDs

Table 1 defines the LEDs for the switch.

Table 1 Status LEDs

Table 2 defines the LEDs for the power of the switch.

Table 2 Power Status LEDs

LED Color Description

LINK/ACT Green

OFF

Blinking

A valid link has been established on the port.

No link has been established on the port.

Data is being received or transmitted on the port.

100M Green

OFF

The port is operating at 100 Mbps.

The port is operating at 10 Mbps.

FDX Green

OFF

The port is operating in full-duplex mode.

The port is operating in half-duplex mode.

PWR LED Color Description

POE Green

OFF/

Blinking

The switch is powered with the Power-Over-Ethernet feature via

Port 5.

The switch is not powered with the Power-Over-Ethernet feature

via Port 5.

WALL Green

OFF

The switch is powered with a wall adapter.

The switch is not powered with a wall adapter.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 47 48

Pas de commentaire

Allied-telesis AT-FS705PD Manuel d'utilisateur Page 11