Allied-telesis AT-FS705L Manuel d'utilisateur télécharger pdf (Page 24)

Chapter 2: Installation

Selecting a Site for the Switch

Observe the following requirements when choosing a site for the

AT-FS705L Fast Ethernet switch:

 If you are installing the switch on a table, be sure that the table is level

and secure.

 The power outlet for the switch should be located near the unit and

should be easily accessible.

 The site should provide for easy access to the ports on the front of the

switch. This will make it easy for you to connect and disconnect

cables, as well as view the switch’s LEDs.

 To allow proper cooling of the switch, air flow around the unit and

through its vents on the side and rear should not be restricted.

 Do not place objects on top of the switch.

 Do not expose the switch to moisture or water.

 Ensure that the site is a dust-free environment.

 Use dedicated power circuits or power conditioners to supply reliable

electrical power to the network devices.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Pas de commentaire

Allied-telesis AT-FS705L Manuel d'utilisateur Page 24