Allied-telesis AT-CV5001 Manuel d'utilisateur télécharger pdf (Page 38)

Chapter 2: Installation

Installing the AT-CV5001AC Power Supply

The AT-CV5001AC Power Supply can be installed in either power supply

slot on the read panel.

Note

The AT-CV5001 Chassis can contain two power supplies. The

power supplies can be of the same type (AC or DC) or different

types (AC and DC).

Note

The power supply module is hot-swappable. If the chassis already

has a power supply that is powered on, you do not have to power off

the unit to install the new power supply module.

To install the AT-CV5001AC Power Supply, perform the following

procedure:

1. Remove the AT-CV5001AC Power Supply from its shipping package

and store the package in a safe place.

Note

You must use the original package if you need to return the unit to

Allied Telesis.

2. Verify the package contents, listed in Table 3.

Table 3. AT-CV5001AC Power Supply Components

One AT-CV5001AC Power Supply

1688

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 85 86

Pas de commentaire

Allied-telesis AT-CV5001 Manuel d'utilisateur Page 38