Allied-telesis AT-CV5000 Manuel d'utilisateur télécharger pdf (Page 24)

Chapter 1: Overview

AT-CV5M01 Management Card

The AT-CV5M01 Management Card provides a CPU subsystem for the

AT-CV5000 chassis as well as the AT-S70 management software

preinstalled that allows you to configure and monitor the status of the

converter line cards. For more information about the AT-S70 management

software, refer to the AT-S70 Management Software User’s Guide.

The AT-CV5000 chassis is shipped without an AT-CV5M01 Management

Card and therefore is by default an unmanaged chassis.

Note

The AT-CV5M01 Management Card is hot-swappable and you can

insert it in any line card slot without powering OFF the chassis.

The AT-CV5M01 Management Card, as shown in Figure 6, features the

following components:

 One RS-232 terminal port with a DB-9 connector for a local

management session

 One 10/100Base-TX twisted pair port with an RJ-45 connector for a

remote management session

 One recessed CPU RESET button

 Six CPU status LEDs

Figure 6. AT-CV5M01 Management Card Components

RS-232 Terminal

Port

The default settings for the RS-232 terminal port are:

 Baud rate: 115200 bps (range 2400 to 115200 bps)

 Data bits: 8

258

AT-CV5M01

R RDY FLT

CPU RESET

T FD

10/100Base-TX Twisted Pair Port

Recessed CPU RESET Button

LEDs

RS-232 Terminal Port

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 113 114

Pas de commentaire

Allied-telesis AT-CV5000 Manuel d'utilisateur Page 24