Allied Telesis AT-RPS8000 Guide d'installation télécharger pdf (Page 8)

8 AT-8700XL Series

C613-04042-01 REV A

To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help

topic

Alternatively, type a question mark (?) at the end of a partially completed

command to see a list of valid options.

See the AT-8700XL Series Software Reference for more information on

configuring the switch.

Using the GUI to configure a switch

The GUI requires a PC and web browser. Minimum browser specifications

are: Internet Explorer 5.x or Netscape 6.2, with JavaScript enabled. Internet

Explorer can be found on the Documentation and Tools CD-ROM that is

bundled with your switch

GUI access is through the switch’s default VLAN (VLAN1). To set-up the

GUI the first time it is used, you must first access the CLI.

1. Access the CLI

Follow the instructions in the previous section: “Using the CLI to configure

a switch”.

2. Enable IP

At the CLI, enter the command:

ENABLE IP

3. Assign an IP address to VLAN1

Assign the VLAN1 interface an IP address in the required subnet, using the

command:

SET IP INTERFACE=vlan1 IP=

ipaddress

MASK

=mask

4. Define a route (if required)

If the PC from which you will access the GUI is on a different subnet to the

switch, add a route from the PC to the switch. Enter:

ADD IP ROUTE=

PC-ipaddress

INTERFACE=vlan1

NEXTHOP=

switch-ipaddress

5. Connect the PC to a switch port

The PC can be connected directly, or through a LAN.

If you access the Internet through a proxy server, set your browser to

bypass the proxy for the IP address you just assigned to the VLAN1

interface.

Point your web browser at the IP address of the VLAN interface.

6. Log in

At the log in prompt, enter the log in name and password.

User Name: manager

Password: friend

The system status page appears and you can now use the GUI to configure

the switch.

1 2 3 4 5 6 7 8 9 10

Commentaires sur ces manuels

Pas de commentaire

Allied Telesis AT-RPS8000 Guide d'installation Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Unités d'alimentation électrique Allied Telesis AT-RPS8000